The proper choice of gloves and the correct use of gloves are directly related to the health of the hands. For the gloves selected in different workplaces, for those with standards, you should choose protective gloves that meet the standards; for those that have not yet established standards, you should go to the labor insurance glove manufacturer according to the protective requirements to buy suitable protective gloves. When selecting and using protective gloves, pay attention to the following:

1. For protective gloves, choose the right size gloves. The size of the glove should be appropriate. If the glove is too tight, it will restrict blood circulation, which will easily cause fatigue and uncomfortable; if it is too loose, it will be inflexible to use and will easily fall off.

2. There are many types of labor insurance gloves wholesale, which should be selected according to the purpose. First, we must clarify the protection object, and then carefully select it to avoid misuse to avoid accidents.

3. Protective gloves. Insulate protective gloves. Before each use, you need to carefully check the appearance, and blow air into the gloves by blowing air, pinch the cuffs of the gloves by hand to prevent air leakage, and observe whether the gloves will leak by themselves . If there are no leaks in the inspection gloves, they can be used as sanitary gloves. The insulated gloves can still be used when they are slightly damaged, but a pair of yarn or leather gloves should be covered outside the insulated gloves to ensure the use.

4. Protective gloves. Rubber gloves should not be in contact with acids, alkalis, and oils for a long time when used, and should be prevented from piercing by sharp objects. After use, wash and dry, sprinkle talcum powder on the inside and outside of the gloves, and keep them properly, and keep them away from pressure or heat.

5. Protective gloves. The color of all rubber, latex, and synthetic rubber gloves needs to be uniform. Except for the palm, the other parts of the gloves should be similar in thickness, and the surface should be smooth (to prevent slippage and make stripes or particles on the palm face. Except for slippery patterns). No bubbles larger than 1.5m are allowed on the palm and face, slight wrinkles are allowed but no cracks are allowed.

6. In addition to the selection of protective gloves and insulated gloves according to regulations, the voltage strength should be retested after one year of use. Those who fail to pass should not be used as insulated gloves.