Latex gloves are one of the most widely used sanitary ware or protective equipment, especially in the medical field, when doctors accept patients for diagnosis or surgery, latex gloves are one of the indispensable protective equipment. Latex gloves are produced on the latex glove production line. Completed, the whole process consists of washing film, dipping latex, crimping, leaching and demolding. The latex gloves of the existing production method are prone to rubber particles in the production, and the rubber particles are attached to the latex gloves to form various bumps. , The production quality of gloves is poor, the existing latex glove production method has many harmful substances, and the user of multiple latex gloves has a greater health impact. The physical properties of the latex gloves produced by the existing latex glove production method are poor. Latex gloves have low elongation and low strength.

How to make latex gloves? I believe many friends have this question. Now let the Huai'an latex manufacturer introduce the process of making latex gloves. Let us understand it together.

First cut the rubber into thin slices, then cut into slices, send it into the sol tank and mix the sol with gasoline. After the sol is emulsified, it will be pumped to the latex central tank. The rubber solution dissolved in gasoline enters from the top of the distillation tower and is heated for steam distillation. The light gasoline is heated into the gas phase, and the gasoline is mixed with cold water and then cooled. The oil-water mixture then reaches the oil-water separator, the oil-water layer. The upper layer is used to recover gasoline, and the lower water is pumped to the cold water tower for cooling. After cooling, use gas gasoline to cool the distillation tower. The latex in the distillation tower is sent to the latex mixing tank for mixing and mixing according to its own pressure. Set aside after toning and filtering.

Then wash the latex glove model with acid and alkali, and then wash with water. The cleaned model is first immersed in hot water, heated to the coagulant, and then dried and dipped. After dipping, it is sent to the oven to start drying, the fiber inner sleeve is added, and the hot water is sent to the oven for vulcanization, drying and forming. Gloves are demolded, shaped at low temperature, washed with water, dehydrated, dried, then packaged and sent to the product warehouse.