HOT TEL:

13115255999

劳保手套厂家
Your current location : Home >> News >> Industry Information

How to clean labor protection gloves so that they will not harden?

2020-10-14
second

Now labor protection gloves have brought great convenience to our lives in our daily life. However, it is inevitable that they will become dirty when using labor protection gloves. At this time, users need to clean the labor protection gloves. However, many users find that After the labor protection gloves are cleaned, it will be found that the labor protection gloves will become hard, so how should they be cleaned so that they will not become hard?


1. First of all, we need to use brushes such as brushing teeth to clean up the dirt on the gloves as much as possible. Special attention should be paid to cleaning the fingertips of working gloves. Then mix a bucket of cold water, salt, and mild soap evenly. Gently wash the cotton gloves in the water and rub the dirt with your fingers.


2. At this time, rinse the labor protection gloves a second time and squeeze gently to overflow the water. Then put each finger on an old clothespin to prevent the fingers from deforming.


3. Find a cool place, hang it with clothespins, air-dry the work gloves, massage or knead the softened work gloves to keep the cotton yarn soft. Continue to knead again, every few hours, until they are completely dry.

Labor protection gloves cleaning

Precautions for the use of protective gloves:


1. All accessories that may affect the safety of operation must be removed before the operation.


2. If you choose those gloves made of rubber, then you should not allow them to come into contact with acids and other substances for a long time, and you should also pay attention not to let such sharp objects touch them.


3. No matter what kind of gloves you are using, you should check them regularly. If damage is found, you should take corresponding measures.


4. Put the cuffs of your clothes into your mouth during work to prevent accidents.


5. Be careful not to allow chemicals to enter the gloves, otherwise it may result in the inability to protect hands.


6. After use, it should be cleaned, and after it is dry, sprinkle with talcum powder to prevent damage, but it should not be placed on the ground.


7. During transportation and storage, it should not be in contact with oleic acid, alkalis or other corrosive substances, and should be stored in a dry and ventilated warehouse at -15 degrees to 30 degrees and a relative humidity of 50 to 80% outside the heat source 1M.


8. The withstand voltage performance must be retested every 6 months. The lighter weight and the provision of a wide range of sizes increase its flexibility; the textured surface helps to hold things tightly; the cotton wool knit lining, spacious The cuffs give more comfort to people working in a higher temperature environment.


Label

Recent: